Ghost Immobiliser Fitting
Secure your vehicle from key theft, cloning and hacking with the first aftermarket CAN-Immobiliser. With the additional option to link to a Ghost app and GPS tracking system that can send you call alerts when your car is altered with or stolen.
The installation of a Ghost immobiliser is done by a qualified technician. Having the right tools, insulation tape, and heat shrink tubing is crucial.
Getting Started
Contrary to physical theft protection devices like wheel locks and car alarms, ghost immobilisers guard your vehicle without the need of LEDs or key fobs. Instead they connect directly to the ECU's CAN data network. They can only be started by entering a PIN sequence. This gives a more secure level of protection from key hacking, cloning and even ECU swapping.
Installing a ghost immobiliser Birmingham requires a high degree of agility and accuracy. It's like walking through a minefield. A single mistake could cause serious damage to your vehicle's circuits. It is important to understand the installation procedure and prepare your vehicle properly.
The first step is to prepare the vehicle by removing interior panels to allow for the immobiliser unit. Once you have found the perfect location to conceal it then use cable tie to secure it. Then, tidy your wiring by tying loose wires down and using insulation tape to cover exposed connections. This will reduce the risk of short circuits that are not intended to be there while also improving aesthetics and reducing the chance of tampering from thieves.
Finally, identify a source of continuous 12V power and an earthing point for the ghost immobiliser. Once you've located these and tested the power wires using a multimeter to ensure they're delivering a consistent voltage. Connect the CAN H and the CAN L wires from the immobiliser to the grounding and power points.
It is essential to double-check all the connections and inspect the immobiliser for indications of corrosion. You should also test the system to ensure it's functioning properly by entering a PIN number and starting the engine. This should be a regular part of your routine since it can help you identify any issues that may be occurring early on. Regular testing can help increase the longevity of your device, and keep it performing at its best.
Preparing the Vehicle
The installation of the Ghost immobiliser is a complicated task that requires the right tools and expertise. A wiring diagram of the vehicle is vital to identify the proper wires and establishing precise connections, while a multimeter can be used to verify electrical values and ensure safety. Insulation tape and cable ties can be used to guard connections from being tampered with and to ensure they are secured. A user manual is available for your Ghost Immobiliser. It will provide you with specific instructions that are tailored to your model.
Once installed the ghost immobiliser will prevent unauthorised engine starts by requiring that the owner enter a unique code using the buttons on the console or the steering wheel. This can be accomplished manually or remotely via a mobile phone app, and the code can easily be changed by the vehicle owner at anytime. The device is also quiet and unnoticeable by thieves because it doesn't emit any radio frequencies.
A ghost immobiliser is connected directly to the vehicle's CAN bus, a network that connects to all of the electronic control units (ECUs). It intercepts signals sent by ECUs, and blocks the engine when a false signal is identified. The system is tamperproof and weatherproof, with no LED indicators or key fobs to attract the attention of thieves.
It can be mounted behind or in a less noticeable area to ensure that it isn't obvious to thieves and won't hinder vehicle performance. It is also possible to put it inside a small, compact box, making it less likely to be discovered during an inspection by unscrupulous car salespeople.
Its stealthy operation and integration with the vehicle's CAN bus system make it an effective deterrent against modern methods of car theft, such as key cloning and signal relay attacks. The system can be paired with other security measures to create a powerful barrier that can thwart even the most persistent thieves. how much is a ghost immobiliser and more insurance companies suggest or require ghost immobilisers, as they can reduce monthly premiums.
Making the Connections
Unlike traditional security systems that are heard by thieves ghost immobilisers are silent and prevent them from knowing when your vehicle has been turned on. They also block high-tech methods used to steal vehicles, like OBD port hacking. They can also be put in without causing permanent marks in your vehicle, making them an excellent option for those planning to sell their vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is among the newest and most reliable options for preventing car theft. It shuts down your engine by using the CAN data network and generates a unique PIN number that is difficult for criminals to guess. It can be installed in many vehicles and integrates with a number of available features, including car alarms GPS trackers, car alarms, steering wheel locks, and door bypass systems for locks.
If you decide to opt for a Ghost immobiliser, be sure to consult the wiring diagram for your specific car model to identify the wires that require connecting. Double-check their locations to ensure they are correct, and then label them or tape them to help remember them. It is also necessary to locate a source of continuous power (12V) and an earthing point for the system. Once you have these in place, you can start to make the connections needed to complete the installation.
If the ghost immobiliser is connected to the CAN bus, it will stop your vehicle from starting until you enter a pin code through the buttons on the steering wheel or dashboard. This will stop ECU cloning as well as other methods of theft of vehicles. In addition, it can be used in conjunction with other Thatcham-approved security equipment, such as alarms and tyre clamps to give your car an additional level of protection.
As the UK automotive aftermarket market expands as do the options to secure your vehicle. With so many avenues for thieves to gain access and steal your car it's essential to do everything you can to protect it from being stolen. Ghost immobilisers are a popular choice among car owners who are responsible.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from running until a specific PIN code is entered. This makes it extremely difficult for thieves to copy your key fob and then start your car, and even more difficult to disable the system through hacking into its electronic components.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help you locate your vehicle in the event that it is stolen. This feature is not an option that is commonly used in security products sold by the aftermarket however it's a great option to increase your security and get peace of mind knowing your vehicle is always protected.
The Ghost-II immobiliser offers not only greater security, but also a convenient experience for the user, by not having to use additional key fobs or devices. It is simple and intuitive PIN code entry that integrates seamlessly with your daily routine. It also has convenience features and deactivation modes that let you to temporarily disable the immobiliser in order to park or service your vehicle.
Prepare the necessary tools and familiarise yourself first with the wiring of your vehicle. A basic set of tools will enable you to create precise connections. A multimeter can be used to verify electrical values. Insulation tape and heat shrink tubing are also crucial to protect connections from short circuits, and cable tie can be used to secure the wiring in the right place. It's also important to work in an area that is well-lit and wear safety gear when using electrical components and tools.
After you've completed the installation, you should test the Ghost immobiliser to verify that it's working as intended. You should first try to start the car without entering the PIN. If this fails, you will need to retest and inspect the connections more carefully.
The Ghost Immobiliser, unlike other security systems is a covert device that is not able to be detected by thieves. It is also far more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA recognized and approved by some insurance companies, which makes it an investment that is cost-effective and will provide you with the peace of mind you deserve.